Home  >>  Products  >>  Alloy Pipes  >>  ASTM/ASME Standard Alloy Pipes
                  ASTM A213 Alloy Pipes
                  ASTM A213 Alloy Pipes ASTM A213 Alloy Pipes
                  ASTM A213 Alloy Pipes ASTM A213 Alloy Pipes

                  ASTM A213 Alloy Pipes

                  Next Inquire Now

                  Specification:

                  ASTM A213M-09 Standard Specication for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, Heat-Exchanger Tubes.


                  This standard is issued under the fixed designation A 213/A 213M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (′) indicates an editorial change since the last revision or reapproval.


                  Mechanical properties:


                  Steel Grade

                  Tensile StrengthN/mm2(min)

                  Yield StrengthN/mm2(min)

                  Elongation % (min)

                  TP304

                  515

                  205

                  35

                  TP304L

                  485

                  170

                  35

                  TP316

                  515

                  205

                  35

                  TP316L

                  485

                  170

                  35

                  TP321

                  515

                  205

                  35

                  T11

                  ≥415

                  ≥205

                  30

                  T12

                  ≥415

                  ≥220

                  ---

                  T13

                  ≥415

                  ≥205

                  30


                  Chemical Composition(%, max)


                  Steel Grade

                  C

                  Si

                  Mn

                  Cr

                  Ni

                  Mo

                  S

                  P

                  TP304

                  0,08

                  0,75

                  2

                  18 - 20

                  8 - 11

                  -

                  0,03

                  0,04

                  TP304L

                  0,035

                  0,75

                  2

                  18 - 20

                  8 - 13

                  -

                  0,03

                  0,04

                  TP316

                  0,08

                  0,75

                  2

                  16 - 18

                  11 - 14

                  2 - 3

                  0,03

                  0,04

                  TP316L

                  0,035

                  0,75

                  2

                  16 - 18

                  10 - 15

                  2 - 3

                  0,03

                  0,04

                  TP321

                  0,08

                  0,75

                  2

                  17 - 20

                  9 - 13

                  -

                  0,03

                  0,04

                  T11

                  0.05-0.15

                  0.50-1.00

                  0.30-0.60

                  0.5-1.0

                  ---

                  1.0-1.5

                  ≤0.25

                  ≤0.025

                  T12

                  0.05-0.15

                  ≤0.50

                  0.30-0.61

                  0.80-1.25

                  ---

                  0.44-0.65

                  ≤0.25

                  ≤0.025

                  T13

                  0.05-0.15

                  ≤0.50

                  0.30-0.60

                  1.90-2.60

                  ---

                  0.87-1.13

                  ≤0.25

                  ≤0.025


                  Ordering Information

                  Orders for material under this specification should include the following, as required, to describe the desired material adequately:

                  Quantity

                  Feet, meters, or number of lengths

                  Name of material

                  Seamless Alloy Steel Pipe

                  Grade

                  STANDARD AND STEEL GRADE

                  Manufacture

                  Hot-finished or cold-drawn

                  Size using one of the following:

                  NPS and Schedule Number

                  Outside Diameter and Nominal Wall Thickness

                  Length

                  Specific or Random

                  End Finish

                  Size (mm) we can supply:

                  Hot-rolled: O.D.: 51-508; W.T.:7~60; L: max 16000

                  Cold-drawn: O.D.: 10-50; W.T.:2~10; L: max 16000

                  Hot-expanded:O.D.: 325-1020; W.T.:6~50; L: max 12000 and other specifications in accordance with customer requirements.

                  Packing:

                  Beveled/black painting/ plastic caps/ in bundles/ steel strips/ wooden protection

                  Inspection and Test:

                  Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength, Yield Strength,Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test, Nodestructive Test, Hydrostatic Test.

                  Surface Treatment:

                  Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting, Epoxy & Fbe Coating Painting as requested.

                  • E-mail: wen@cn-big.com
                  • Tel: +86 010 5246 1208
                  • Fax: +86 010 5140 6975
                  • Add: Tongzhou District, Beijing, China

                  Copyright ? BIG Co., Ltd. All Rights Reserved

                  Technical Support:

                  羞羞色院app